Skytec Sapphire Aero Nitrile-Coated HPPE Oil Grip Gloves
With the Skytec Sapphire Aero Nitrile-Coated HPPE Oil Grip Gloves, you can improve your grip on a range of oily and dry components to prevent slippage and accidents. The gloves also offer mechanical protection for safer work with coarse and sharp materials, making them suitable for industries such as construction, automotive, logistics, and transport industries. The seamless and breathable HPPE liner ensures comfort as well as a good level of protection.
Key Information
- Glove Codes
- SKG00011FD
- SKG00011FF
- SKG00011FH
- SKG00011FJ
- EN 388: 4X42C
- Available Sizes: 7 - 10
- Pair of Gloves
Resistance of the Skytec Gloves
These durable industrial gloves are ideal for providing a basic level of mechanical protection to reduce the risk of injury when working with coarse or sharp materials. They also feature a full foam-nitrile coat to enhance grip on dry and oily components, helping to preventing slippage and accidents.
To ensure high performance levels, these gloves have been tested to European Standards of safety. The results are as follows:
EN 388 (Mechanical Resistance)
| Hazard | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | N/A |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 2 |
| ISO Cut Resistance | Level C |
Read our guide to EN 388 safety standards to learn more.
Uses of the Fully Coated Gloves
The Skytec Sapphire Aero gloves are perfect for work in low to medium risk industrial environments, and are able to provide protection against injury as well as improved grip. This makes them suitable for industries and applications such as:
- Handling Oily/Greasy Components
- Machinist Tasks
- Automotive
- Automotive Aftermarket
- Building and Construction
- Scaffolding
- Maintenance
- Manufacturing
- Assembly
- Transport
- Warehousing and Logistics
- Handling Sharp Materials
Key Features and Benefits
- 18-gauge coated HPPE gloves in yellow and black
- Supplied as a pair
- Perfect for use in automotive, machinist, construction, and logistics industries
- Suitable for work with oily and dry components
- Allows ease-of-movement for use during precision tasks
- Full-nitrile coat improves glove grip function to prevent slippage and accidents
- Reinforced thumb crotch offers a hardwearing design for long-lasting protection
- Glove liner is seamless and free from glass and steel fibres to prevent irritation
- Breathable design helps to prevent uncomfortable build-ups of sweat
- Elasticated wrist design provides a secure fit for reduced risk of glove slippage
- Available in four different sizes
Sizing Information for the Seamless Gloves
The Skytec Sapphire Aero gloves are available in four different sizes. If you're not sure which size is right for you, measure the length of your hand and the circumference of your palm at the knuckle, excluding the thumb (as seen below). Once you have these measurements, compare them to the below sizing table to determine your glove size.
| Size | Palm Circumference | Hand Length |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Provides Basic Mechanical Protection
These durable, coated HPPE gloves offer wearers a basic level of mechanical protection in low to medium risk industrial work environments, helping to improve safety when working with sharp or coarse materials.
Materials
- Liner: HPPE
- Coat: Nitrile (Foam)
Additional Documents
