Ansell AlphaTec 85-500 EPDM Medium-Weight Isolator Box Gauntlets
Designed with a comfortable and flexible rubber coating, the Ansell AlphaTec 85-500 EPDM Medium-Weight Isolator Box Gauntlets perform best when resisting hydrogen peroxide and common disinfecting chemicals. They are designed for longevity because they can resist ageing due to exposure to oxygen, UV rays and ozone, while they can complete autoclave sterilisation up to 50 times.
Key Information
- Glove Codes:
- EN 374:2003 Rating: AKL
- EN 388:2003 Rating: 4111
- EN 420:2003
- Size Range: Size 9.5 - Size 11
- Supplied as a case of 10 pairs
Resistance of the AlphaTec 85-500 EPDM Medium-Weight Gauntlets
The Ansell 85-500 EPDM Medium-Weight Gauntlets have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 374
The AlphaTec Medium-Weight Isolator Box Gauntlets have been tested against EN standard EN 374, and are certified for use with chemicals and microorganisms. They have a permeation resistance of at least 30 minutes when tested against EN 374 - 1, with the following chemicals.
Symbol | Chemical |
A | Methanol |
K | Sodium Hydroxide 40% |
L | Sulphuric Acid 96% |
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 1 |
Tear Resistance | Level 1 |
Puncture Resistance | Level 1 |
Uses of the AlphaTec 85-500 EPDM Medium-Weight Box Gauntlets
The AlphaTec EPDM Medium-Weight Gauntlets are designed for use with harsh chemicals. They can be used inside and outside, in dry, wet and oily conditions and in clean and dirty environments. Some applications where these gauntlets are recommended include:
- Agriculture
- Autoclave sterilisation
- Chemical use
- Chemical processing
- Cleaning
- Electronics
- Household cleaning
- Industrial cleaning
- Janitorial
- Laboratory
- Local authorities
- Oil and gas
- Petro-chemical
- Pharmaceutical
- Refuse handling
- Utilities
Key Features of the 85-500 Medium-Weight Isolator Box Gauntlets
- Designed with high quality rubber to ensure quality
- Protects against hydrogen peroxide and other disinfecting chemicals
- Designed to fit most isolator glove boxes
- Suitable for repeated autoclave sterilisation (up to 50 times)
- Highly comfortable construction ideal for extended use
- Designed to be sensitive and dexterous perfect for tactile applications
- Resists ageing from exposure to oxygen, UV rays and ozone
- Heat resistant properties withstand temperatures of up to 130°C
- Features a narrow port size of 203mm
- Available in two sizes that should suit most users
Sizes of the AlphaTec 85-500 Medium-Weight Gauntlets
The Ansell 85-500 Gauntlets are available in two sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 9.5 | 242mm | 198mm |
Size 11 | 279mm | 215mm |
Documentation for the Ansell 85-500 EPDM Isolator Box Gauntlets
Conformity Statement | Instructions for Use |
| |
Please note that these gloves are made to order, and therefore have a three-month lead time on average.