Ansell AlphaTec 85-601 EPDM+ Isolator Box Gloves

The Ansell AlphaTec 85-601 EPDM+ Isolator Box Gloves feature a unique dual-layer breach detection system, ensuring glove failure can be identified before containment issues arise when working with gloveboxes. Composed of high-strength EPDM+ rubber, these gauntlets are also suitable for autoclave sterilisation up to 50 times, making it easier to maintain glove hygiene and reducing the need for glove replacement.

Please note that these gloves are available for purchase in cases of 10 pairs only.

Key Information

• Glove Code: 85-601
• EN 388:2003 Rating: 3100
• EN 374 Rating: AKL
• EN 420
• Port Size: 250mm
• Available Sizes: 9.5, 11
• Supplied in a case of 10 pairs

Resistance of the Ansell AlphaTec 85-601 Glovebox Gloves

The Ansell AlphaTec 85-601 Gloves have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:

EN 388

EN 374

Uses of the Ansell AlphaTec 85-601 Isolator Box Gauntlets

The AlphaTec 85-601 Gloves are designed for use in containment gloveboxes, isolation gloveboxes and isolators. Typical industries where isolator boxes can be used include:

• Electronics
• Life sciences
• Pharmaceuticals

The AlphaTec 85-601 Gloves are designated Category III gloves, meaning they have a complex design intended for the highest levels of risk.

Key Features of the Ansell AlphaTec 85-601 EPDM+ Isolator Box Gauntlets

• Dual-layered isolator box gloves
• Easy breach detection system with unique white material on a black lining
• Designed for repeated autoclave sterilisation, reducing the need for replacements
• Resistant against hydrogen peroxide solutions and common disinfectants
• Resists ageing from exposure to oxygen, UV rays and ozone
• Withstands temperatures up to 130°C
• Halogen free; suitable for disposal by incineration
• Approved for food contact in accordance with FDA specifications

Sizing of the Ansell AlphaTec 85-601 Isolator Box Gloves

The AlphaTec 85-601 Gloves are available in two different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

The 85-601 are designed for gloveboxes with a port size of 250mm.

Materials of the Ansell AlphaTec 85-601 Gloves

• Coating Material: Ethylene propylene diene monomer rubber

Documentation for the Ansell AlphaTec 85-601 Glovebox Gloves

Conformity Statement	Instructions for Use

Please note that these gloves are made to order, and therefore have a three-month lead time on average.

Non-Returnable Item

Unfortunately, due to the nature of this item, we cannot accept returns of the product once any packaging has been opened. The reason that we do this is to give our customers piece of mind that the gloves that they wear have not been previously used. This does not affect your statutory rights as a consumer.

For more information regarding our returns policy, please visit our Returns page.

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1 - 3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays). Orders placed before 14:00 on a working day are usually dispatched on the same day; for orders outside of this time frame, they will be dispatched on the next working day.

Please contact our Customer Care Team on 020 7501 0597 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

*Please note that some orders going to non-mainland UK or the Scottish highlands may be subject to a delivery surcharge.