Ansell Powerflex 80-658 Heavy-Duty Kevlar Gloves
The Ansell Powerflex 80-658 Heavy-Duty Kevlar Gloves are constructed from glass fibre, stainless steel and Kevlar for durable and reliable protection against mechanical hazards. With crinkle latex palms that repel liquid and provide excellent grip in both wet and dry conditions, these gloves are ideal for an extensive range of manual handling tasks, including recycling, refuse collection, panel handling, glass handling and sheet metal handling.
Key Information
- Glove Code: 80-658
- EN388:2016 Rating: XX43E
- EN407: X2XXXX
- Size Range: Size 6 - Size 11
- Supplied as a pair
Resistance of the Ansell Powerflex 80-658 Heavy-Duty Kevlar Gloves
The Ansell 80-658 Kevlar Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results of these tests below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level X |
| Cut Resistance | Level X |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
| ISO Cut Resistance | Level E |
EN407
| Property | Resistance Level |
| Resistance to Flammability | Level X |
| Resistance to Contact Heat | Level 2 |
| Resistance to Convective Heat | Level X |
| Resistance to Radiant Heat | Level X |
| Resistance to Small Splashes of Molten Metal | Level X |
| Resistance to Large Splashes of Molten Metal | Level X |
Uses of the Powerflex Heavy-Duty Kevlar Gloves
Providing good protection against mechanical hazards, contact heat and liquids, and offering good grip in wet and dry conditions, the Powerflex 80-658 Gloves are suitable for a wide range of applications, including (but not limited to):
- Building
- Construction
- Glass
- Handling of heavy loads
- Handling of glass sheets
- Handling of metal sheets
- Metal fabrication
- Recycling
- Waste handling
- Waste sorting
Key Features and Benefits of the Ansell 80-658 Kevlar Gloves
- Knitted 7 gauge general-purpose work gloves
- Comprised of nylon, cotton, steel, glass fibre and Kevlar
- Three-quarter latex-dipped for enhanced resistance
- Liquid-repellent coating for enhanced safety
- Crinkle finish on the palms for firm grip
- Good resistance to contact heat
- Extra-long cuff protects the wrists
- Dark green colour helps to mask dirt
- Can be washed for better hygiene and longevity
Sizing of the Ansell Powerflex 80-658 Heavy-Duty Kevlar Gloves
These gloves are available in two sizes - Size 6 to Size 11. To determine which size is best for you, please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Glove Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Materials of the Powerflex 80-658 Kevlar Gloves
Liner Material: Kevlar, cotton, nylon, glass fibre and stainless steel
Palm Coating: Natural rubber latex
Documentation for the Ansell Powerflex Heavy-Duty Kevlar Gloves
| Conformity Statement | Instructions for Use |
 | |
.jpg)
