Aurelia 405 Level C Cut Resistant Sandy Nitrile-Coated Grip Gloves
When working with oily and sharp equipment, the right level of protection is important. The Aurelia 405 Level C Cut resistant Sandy Nitrile-Coated Gloves are designed with cut protection and grip of wet objects in mind, with an ISO cut level C for protection against sharp objects like sheet metal and steel. They also feature a sandy nitrile coating on the palms to provide great grip for any wet or slippery objects.
Key Information
- Glove Codes:
- Small: 405/7
- Medium: 405/8
- Large: 405/9
- Extra Large: 405/10
- XX-Large: 405/11
- EN388 Rating: 4X42C
- Size Range: 7 - 11
- Supplied as a single pair of gloves
Mechanical Resistance of the Aurelia 405 Cut Resistant Grip Gloves
EN388 (Mechanical Resistance)
| Hazard | Resistance Level |
| Abrasion Resistance | 4 |
| Cut Resistance | X |
| Tear Resistance | 4 |
| Puncture Resistance | 2 |
| ISO Cut Resistance | C |
High Abrasion and Tear Resistance for Regular Use
The Aurelia 405 Cut Resistant Grip gloves feature the highest level of tear and abrasion resistance. This means they have been designed and tested to withstand regular handling of abrasive, rough items without wearing out, and can withstand friction without tearing. This makes the gloves suitable to use on a daily basis.
ISO Cut Resistance Level C
The Aurelia 405 Gloves are designed to protect your hands from moderate cut hazards with a force of up to 10 newtons. This makes the gloves suitable for handling most sheet metal and steel products.
Sandy Nitrile Coated For Grip of Wet Items
The Aurelia 405 Cut Resistant Grip Gloves feature a sandy nitrile material on the palm and fingers, making them a great option to provide dry grip of wet items. They're ideal for working with oily or slippery objects, or any work that occurs outside in wet weather conditions.
Who Can Use The Aurelia 405 Cut Resistant Grip Gloves?
The Aurelia 405 Gloves provide suitable protection for the following industries:
- Metalwork
- Aerospace
- Mechanics
- Automotive
- Steel work
- Metal coil handling
- Assembly
- Repair work
- Fabrication
Key Features and Benefits
- HPPE and steel fibre material helps to protect your hands from hazards
- Cut resistant at ISO cut level C makes the gloves ideal for industries with slight to moderate cut risks
- Sandy nitrile coating offers great grip for slippery, wet, or oily parts and objects
- Hand former technology means the gloves have a superior and ergonomic fit
- Comes in an eco-friendly paper wrap, meaning plastic waste is minimised
- High level tear and abrasion resistance means the gloves are well suited for continued intense use
Are the Aurelia 405 Gloves suitable for Wet/Slippery Parts?
The Aurelia 405 Cut Resistant Gloves provide ideal grip for oily, wet, and slippery parts. If you desire the same level of cut protection, but work with dry to slightly oily parts, we recommend the Aurelia 402 Level C Cut Resistant Metalwork Gloves.
Which Size is Right For Me?
The Aurelia 405 Cut Resistant Grip Gloves are available in five sizes. To find your perfect size, measure the circumference and length of your hands (as shown in the diagram below) and match your measurement to the table below.
| Size | Circumference (mm) | Length (mm) |
|---|
| Size 7 (Small) | 178mm | 171mm |
| Size 8 (Medium) | 203mm | 182mm |
| Size 9 (Large) | 229mm | 192mm |
| Size 10 (Extra Large) | 254mm | 204mm |
| Size 11 (XX-Large) | 279mm | 215mm |
Materials Specifications
- Liner: HPPE and Steel Fibre
- Coating: Sandy Nitrile
Additional Documentation
