Ejendals Tegera 135 Fine Assembly Gloves
Light assembly gloves must be flexible, comfortable and ergonomically sound. They must not limit fine handling capabilities whilst providing sufficient protection for both workers and product.
With a protective, high-dexterity design, the Ejendals Tegera 135 Fine Assembly Gloves are ideal for fine assembly tasks. With a supple full-grain goatskin palm and a low moisture-absorbing nylon back they are highly comfortable to wear, even for extended periods of work.
Key Information
- Glove Code: 135
- EN 388:2003 Rating: 2010
- EN 420
- Size Range: 6 - 11
- Supplied as a pair
Resistance of the Ejendals 135 Light Assembly Gloves
The Ejendals Tegera 135 Fine Assembly Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion | Level 2 |
Cut | Level 0 |
Tear | Level 1 |
Puncture | Level 0 |
Uses of the Tegera 135 Assembly Gloves
Featuring a flexible, durable design, the Ejendals Tegera 135 are ideal for all manner of light assembly and handling work. Typical applications include:
- Assembly
- Building
- Carpentry
- Construction
- Engineering
- Gardening
- Inspection
- Installation
- Machine operation
- Repair work
- Shop work
- Soil preparation
- Transport work
- Warehouse work
The 135 Assembly Gloves are designated Category II gloves. This means they are suitable for medium-duty work and intermediate risks.
Key Features of the Ejendals Tegera 135 Fine Assembly Gloves
- Light work gloves for assembly tasks
- Supple full-grain goatskin palm for fingertip dexterity
- Reinforced index finger and fingertips for durability
- Strong, low moisture-absorbing nylon back for comfort during extended use
- Provides protection against:
- Abrasion injuries
- Blisters
- Grazes
- Lacerations
- Scratches
Sizing of the Tegera 135 Assembly Work Gloves
The Ejendals Tegera 135 Fine Assembly Gloves are supplied in six different sizes, meaning they should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 6 | 152mm | 160mm |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Please note that as fine assembly gloves these gloves are designed for a close fit. They feature a palm thickness of between 0.6mm and 0.7mm.
Materials of the Ejendals Tegera 135 Work Gloves
- Palm material: Full grain goatskin
- Back material: Nylon
- Material specification: Leather (50%), nylon (49%), natural latex (1%)
Documentation for the Ejendals Tegera 135 Assembly Gloves
Conformity Statement | Instructions for Use |
| |