Ejendals Tegera 310A Double Knitted Assembly Gloves
For assembly tasks and other dexterous work, precision work gloves are essential. The Ejendals Tegera 310A Double Knitted Assembly Gloves have a thin double-knitted cotton/nylon construction, meaning they are thin yet strong and ideal for fine handling tasks.
Key Information
- Glove Code: 310A
- EN 388:2003 Rating: 224X
- EN 407: X1XXXX
- EN 420
- Size Range: 6 - 11
- Supplied as a pair
Resistance of the Ejendals Tegera 310A Light Assembly Gloves
The Ejendals Tegera 310A have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 2 |
Cut Resistance | Level 2 |
Tear Resistance | Level 4 |
Puncture Resistance | N/A |
EN 407
Property | Resistance Level |
Burning Resistance | N/A |
Contact Heat Resistance | Level 1 |
Convective Heat Resistance | N/A |
Radiant Heat Resistance | N/A |
Molten Metal Resistance (Small Splashes) | N/A |
Molten Metal Resistance (Large Splashes) | N/A |
Uses of the Tegera 310A Precision Assembly Gloves
With a soft design that is ideal for fine handling and precision assembly tasks, the Ejendals Tegera 310A are suitable for a variety of applications, including:
- Assembly
- Automotive
- Driving
- Installation work
- Machine operation
- Pulp and paper
- Repair work
- Sanitation
- Shop work
- Service
The Tegera 310A are designated Category II gloves, meaning they are suitable for medium-duty applications and intermediate levels of risk.
Key Features of the Ejendals Tegera 310A Precision Work Gloves
- High-dexterity precision assembly gloves
- Thin double-knitted cotton/nylon construction
- Good fingertip sensitivity for fine handling
- High level of tear resistance
- Breathable for comfort during extended use
- Ideal for assembly applications
- Provides protection against:
- Abrasion injuries
- Blisters
- Contact with dirt
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 310A Assembly Work Gloves
The Ejendals Tegera 310A are available in six different sizes, making them suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 6 | 152mm | 160mm |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
As precision work gloves, the Ejendals Tegera 310A are designed for a close fit; they have a knitting gauge of 13gg.
Materials of the Ejendals Tegera 310A Light Work Gloves
- Material Specification: Nylon (60%), cotton (30%), polyester (5%), elastane (5%)
Documentation for the Ejendals Tegera 310A Light Work Gloves
Conformity Statement | Instructions for Use |
| |