Ejendals Tegera 464 Heat Resistant Gauntlets
With an extended safety cuff for wrist protection, the Ejendals Tegera 464 Heat Resistant Gauntlets provide contact heat resistance up to 250°C. Comfortable to wear, these heat-resistant gauntlets are useful for everything from baking to metalwork.
Key Information
- Glove Code: 464
- EN 388:2003 Rating: 3242
- EN 407 Rating: X2XXXX
- EN 420
- Size Range: 9 - 11
- Supplied as a pair
Resistance of the Ejendals Tegera 464 Heat Resistant Gauntlets
The Ejendals Tegera 464 have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 3 |
Cut Resistance | Level 2 |
Tear Resistance | Level 4 |
Puncture Resistance | Level 2 |
EN 407
Property | Resistance Level |
Burning Resistance | N/A |
Contact Heat Resistance | Level 2 |
Convective Heat Resistance | N/A |
Radiant Heat Resistance | N/A |
Molten Metal Resistance (Small Splashes) | N/A |
Molten Metal Resistance (Large Quantities) | N/A |
Uses of the Ejendals Tegera 464 Hot Work Gloves
With a robust heat-resistant design, the Ejendals Tegera 464 are suitable for a number of work applications. Typical uses include:
- Brick industry
- Concrete work
- Glass industry
- Hotel and restaurant work
- Hot work
- Kitchen work
- Metal fabrication
- Metalwork
- Rubber and plastic
- Sheet metal work
The Ejendals Tegera 464 are designated Category III gloves, meaning they have a complex design which is intended to protect against the highest levels of risk.
Key Features of the Ejendals Tegera 464 Heat Resistant Work Gloves
- Heat-resistant cotton/nitrile gauntlets
- Withstands contact heat up to 250°C
- Extended safety cuff for wrist protection
- Robust design with good mechanical resistance
- Ideal for glass and metal industry work
- Provides protection against:
- Burn injuries
- Heat injuries
Sizing of the Ejendals Tegera 464 Heat Resistant Gauntlets
The Ejendals Tegera 464 are supplied in three different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Please note that the Ejendals Tegera 464 are heavy-duty work gloves that are designed for a slightly looser fit. All sizes of this glove feature a universal length of 350mm.
Materials of the Ejendals Tegera 464 Heat Resistant Gauntlets
- Liner Material: Cotton
- Material: Nitrile
- Material Specification: Polyester (60%), nitrile (30%), cotton (10%)
Documentation for the Ejendals Tegera 464 Heat Resistant Gauntlets
Conformity Statement | Instructions for Use |
| |