Ejendals Tegera 484 Hot Gloves
With the ability to withstand contact heat up to 250°C, the Ejendals Tegera 484 Hot Gloves are ideal for handling hot objects and surfaces. Featuring nitrile dots for improved grip, and a safety cuff for wrist protection, they are designed to be effective and comfortable in use.
Key Information
- Glove Code: 484
- EN 388:2003 Rating: 1232
- EN 407 Rating: 02XXXX
- EN 420
- Available Size: 10
- Supplied as a pair
Resistance of the Ejendals Tegera 484 Heat Resistant Gloves
The Ejendals Tegera 484 Hot Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 1 |
Cut Resistance | Level 2 |
Tear Resistance | Level 3 |
Puncture Resistance | Level 2 |
EN 407
Property | Resistance Level |
Burning Resistance | Level 0 |
Contact Heat Resistance | Level 2 |
Convective Heat Resistance | N/A |
Radiant Heat Resistance | N/A |
Molten Metal Resistance (Small Splashes) | N/A |
Molten Metal Resistance (Large Splashes) | N/A |
Uses of the Ejendals Tegera 484 Heat Resistant Work Gloves
With a highly protective design, the Ejendals 484 are suitable for a variety of uses. Typical applications include:
- Automotive
- Brick industry
- Building work
- Concrete work
- Construction
- Glass industry
- Hotel and restaurant work
- Inspection work
- Installation work
- Machine operation
- Metal fabrication
- Mining
- Oil and gas
- Petrochemicals
The Ejendals Tegera 484 gloves are designated Category II gloves. This means they have a complex design which is intended for the highest levels of risk.
Key Features of the Ejendals Tegera 484 Work Gloves
- Heat-resistant cotton work gloves
- Withstands contact heat up to 250°C
- Robust, durable design
- Red nitrile dot pattern for improved grip
- Safety cuff for wrist protection
- Provides protection against heat injuries
Sizing of the Ejendals Tegera 484 Hot Work Gloves
The Ejendals Tegera 484 are supplied in a single size only. To determine if this is suitable for you, please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 10 | 254mm | 204mm |
Please note that the Tegera 484 are general purpose work gloves that are designed for a slightly looser fit. This means those with slightly smaller measurements than those stated above may find these gloves suitable. The Ejendals Tegera 484 are 350mm in length.
Materials of the Ejendals Tegera 484 Heat Resistant Gloves
- Liner Material: Cotton, nitrile dots
- Material Specification: Cotton (95%), nitrile (5%)
Documentation for the Ejendals Tegera 484 Heat Resistant Gloves
Conformity Statement | Instructions for Use |
| |