Ejendals Tegera 494 Heavy Duty Neoprene Lab Gloves
Providing resistance to extremes of both heat and cold, as well as chemical resistance, the Ejendals Tegera 494 Heavy Duty Neoprene Lab Gloves are ideal for work in the harshest environmental conditions – whether in laboratory or industrial settings. Featuring a crinkled grip pattern and a thermal lining, they are both comfortable and effective in use.
Key Information
- Glove Code: 494
- EN 388:2003 Rating: 3121
- EN 407 Rating: 44XXXX
- EN 511 Rating: 021
- EN 374 Rating: AJKL
- EN 420
- Available Size: 10
- Supplied as a pair
Resistance of the Ejendals Tegera 494 Heavy Duty Lab Gloves
The Ejendals Tegera 494 gloves have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 3 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
EN 407
| Property | Resistance Level |
| Burning Resistance | 4 |
| Contact Heat Resistance | 4 |
| Convective Heat Resistance | X |
| Radiant Heat Resistance | X |
| Molten Metal Resistance (Small Splashes) | X |
| Molten Metal Resistance (Large Quantities) | X |
EN 511
| Property | Resistance Level |
| Convective Cold Resistance | Level 0 |
| Contact Cold Resistance | Level 2 |
| Water Permeability | Level 1 |
EN 374
| Code Letter | Chemical | Permeation Level |
| A | Methanol | Level 4 |
| J | n-Heptane | Level 4 |
| K | Sodium hydroxide (40%) | Level 6 |
| L | Sulphuric acid (96%) | Level 6 |
Uses of the Ejendals Tegera 494 Laboratory Gloves
With a highly resistant and durable design, the Ejendals Tegera 494 lab gloves are suitable for a variety of uses. Typical applications include:
- Agricultural work
- Chemical work
- Laboratory work
- Metal fabrication
- Metalwork
- Oil and gas
- Paper industry
- Petrochemicals
- Rubber and plastics
The Ejendals Tegera 494 are designated Category III gloves. This means they have a complex design which is intended to protect against the highest levels of risk.
Key Features of the Ejendals Tegera 494 Neoprene Lab Gloves
- Chemical-resistant neoprene lab gloves
- Withstand contact heat up to 500°C
- Thermal lining for effective cold resistance
- Latex free for reduced irritation
- Extended cuff for wrist protection
- Crinkle palm pattern for improved grip
- Provides protection against:
- Burn injuries
- Contact with cold
- Contact with damp
- Contact with moisture
- Corrosive injuries
- Heat injuries
Sizing of the Ejendals Tegera 494 Heavy Duty Neoprene Gloves
The Ejendals Tegera 494 are available in a single size only. To determine if this is suitable for you, please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 10 | 254mm | 204mm |
Please note that Ejendals Tegera 494 are robust work gloves designed for extreme conditions, so a tight fit is not essential. As such, those with measurements slightly smaller than those stated above may find these gloves to be effective for their application. The Ejendals Tegera 494 gloves are 450mm in length.
Materials of the Ejendals Tegera 494 Heavy Duty Laboratory Gloves
- Dipping Material: Neoprene
- Outer Material Specification: Chloroprene (100%)
- Inner Material Specification: Cotton (100%)
- Antibacterial/Biocidal Treatment: Pyrithione zinc (CAS number 13463-41-7)
Documentation for the Ejendals Tegera 494 Heavy Duty Gloves
| Conformity Statement | Instructions for Use |
 | |
