Ejendals Tegera 682A Hi-Vis Palm Coated Thermal Work Gloves
Ideal for outdoor work in cold conditions, the Ejendals Tegera 682A Hi-Vis Palm Coated Thermal Work Gloves feature thermal protection, water and oil repellence and a high-visibility orange design. With a sandy finish for improved grip and a knitwrist cuff for additional comfort, these gloves keep you both comfortable and protected in harsh environments.
Key Information
- Glove Code: 682A
- EN 388:2003 Rating: 2332
- EN 511 Rating: 02X
- EN 420
- Size Range: 7 - 11
- Supplied as a pair
Resistance of the Ejendals Tegera 682A High Visibility Work Gloves
The Ejendals Tegera 682A have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 2 |
Cut Resistance | Level 3 |
Tear Resistance | Level 3 |
Puncture Resistance | Level 2 |
EN 511
Property | Resistance Level |
Convective Cold Resistance | Level 0 |
Contact Cold Resistance | Level 2 |
Water Permeability | N/A |
Uses of the Ejendals Tegera 682A Orange Hi-Vis Palm Coated Gloves
With a weather-resistant, comfortable design, the Ejendals Tegera 682A are suitable for a variety of uses. Typical applications include:
- Agricultural work
- Building work
- Concrete work
- Construction
- Transport work
The Ejendals Tegera 682A are designated Category II gloves, meaning they are suitable for medium-duty applications and intermediate levels of risk.
Key Features of the Ejendals Tegera 682A Water Repellent Work Gloves
- Palm- and knuckle-coated high-visibility work gloves
- Water- and oil-repellent palm
- Warm design with thermal resistance
- Sandy finish for excellent grip
- Soft knitwrist cuff for comfort
- Provides protection against:
- Abrasion injuries
- Blisters
- Contact with cold
- Contact with damp
- Contact with dirt
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 682A Allround Work Gloves
The Ejendals Tegera 682A are available in five different sizes, making them suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
With a fairly fine knitting gauge of 10gg, the Ejendals Tegera 682a are designed to fit snugly, but not tightly.
Materials of the Ejendals Tegera 682A Latex 3/4 Coated Work Gloves
- Liner Material: Acrylic (10gg)
- Dipping Material: Latex
- Outer Material Specification: Natural latex, acrylic
Documentation for the Ejendals Tegera 682A High Visibility Heavy Work Gloves
Conformity Statement | Instructions for Use |
| |