Ejendals Tegera 7350 Chemical Resistant Thermal Gloves
Combining chemical resistance with a thermal lining, the Ejendals Tegera 7350 Chemical Resistant Thermal Gloves provide a high level of protection for a variety of applications. With a sandy finish for fantastic grip, and an oil- and grease-resistant design, they have excellent handling characteristics – even in the harshest of environments.
Key Information
- Glove Code: 7350
- EN 388:2003 Rating: 4212
- EN 374 Rating: JKL
- EN 420
- Approved for foodstuff handling
- Size Range: 8 - 11
- Supplied as a pair
Resistance of the Ejendals Tegera 7350 Chemical Resistant Work Gloves
The Ejendals Tegera 7350 have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 2 |
Tear Resistance | Level 1 |
Puncture Resistance | Level 2 |
EN 374
Code Letter | Chemical | Permeation Level |
J | n-Heptane | Level 6 |
K | Sodium hydroxide (40%) | Level 6 |
L | Sulphuric acid (96%) | Level 1 |
Uses of the Ejendals Tegera 7350 Winter Lined Chemical Gloves
With a highly protective design, the Ejendals Tegera 7350 are suitable for a variety of uses. Typical applications include:
- Chemical work
- Cold stores
- Concrete work
- Construction
- Food handling
- Freezers
- Marine work
- Oil and gas
- Painting
- Paper industry
- Petrochemicals
The Ejendals Tegera 7350 are designated Category III gloves, meaning they have been developed for the highest levels of risk.
Key Features of the Ejendals Tegera 7350 Insulated Chemical Resistant Gloves
- Thermal chemical-resistant work gloves
- Fleece lining for effective thermal insulation
- Oil- and grease-resistant design
- Excellent abrasion resistance
- Sandy finish for improved grip
- Food safe for food industry applications
- Provides protection against:
- Contact with cold
- Contact with chemicals
- Contact with dirt
- Contact with heat
- Contact with oil and fat
- Corrosive injuries
Sizing of the Ejendals Tegera 7350 Cold Resistant Chemical Gloves
The Ejendals Tegera 7350 are available in four different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Materials of the Ejendals Tegera 7350 Winter Work Gloves
- Dipping Material: Nitrile
- Lining Material: Fleece
- Outer Material Specification: Nitrile (100%)
- Middle Material Specification: Cotton (100%)
- Inner Material Speicfication: Acrylic (100%)
Documentation for the Ejendals Tegera 7350 Nitrile Chemical Resistant Gloves
Conformity Statement | Instructions for Use |
| |