Ejendals Tegera 846 Disposable Nitrile Gloves
The Ejendals Tegera 846 Disposable Nitrile Gloves provide excellent splash protection against chemicals and are suitable for various light work applications. They are approved for foodstuff handling and supplied in an extra long design with a non-powdered inside to reduce skin irritation.
Key Information
- Glove Code: 846
- EN 388:2003 Rating: 1001
- EN 374 - 2
- EN 374 - 3
- EN 420:2003
- Size Range: 7 - 12
- Supplied as a box of 50 gloves
Resistance of the Ejendals 846 Disposable Nitrile Gloves
The Ejendals Tegera 846 Disposable Nitrile Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 1 |
Cut Resistance | Level 0 |
Tear Resistance | Level 0 |
Puncture Resistance | Level 1 |
EN 374 - 2
EN374-2 resistance to penetration by micro-organisms.
EN 374 - 3
EN374-3 Resistance to chemical hazards (permeation).
Uses of the Tegera 846 Disposable Nitrile Gloves
The Tegera 846 Disposable Nitrile Gloves are designed for use in a range of environments, such as:
- Dirty environments
- Microbiological risk environments
- Moist environments
- Oil and greasy environments
- Wet environments
This makes them suitable for the following applications:
- Cleaning
- Fishing industry
- Food handling
- Food processing
- Hotels, restaurants and cafes
- Kitchen work
- Service work
The 846 Disposable Nitrile Gloves are designated Category III gloves, which means that they have been designed to protect against the highest levels of risk, such as highly corrosive acids. Gloves in this category are of complex design and suitable for irreversible or mortal risks.
Features of the Ejendals Tegera 846 Disposable Nitrile Gloves
- Approved for foodstuff handling
- Offer excellent splash protection against chemicals
- Supplied in an extra long blue design
- Non-powdered insides for reduced skin irritation
- Provide protection against:
- Contact with chemicals
- Contact with damp
- Contact with dirt
- Contact with moisture
- Corrosive injuries
- Risk of infection
Sizing of the Ejendals 846 Nitrile Gloves
The Ejendals Tegera 846 Disposable Gloves are available in seven sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 6 | 152mm | 160mm |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Size 12 | Over 279mm | Over 215mm |
Materials of the Ejendals Tegera 846
- Material: Nitrile
- Thickness: 0.19mm
- Inside: Non-powdered
Chemical Resistance Guide
Documentation for the Ejendals Tegera 846 Disposable Nitrile Gloves
Conformity Statement | Instructions for Use |
| |