Ejendals Tegera 882 Fully Dipped Fine Assembly Gloves
The Ejendals Tegera 882 Fully Dipped Fine Assembly Gloves are fully dipped in nitrile, which means they have outstanding water and oil-repellent properties on both sides of the glove. With excellent flexibility, Level 4 abrasion resistance and micro foam grip pattern, they are suitable for a range of light to medium work applications.
Key Information
- Glove Code: 882
- EN 388:2003 Rating: 4122
- EN 420:2003
- Size Range: 7 - 11
- Supplied as a pair
Resistance of the Ejendals 882 Fully Dipped Fine Assembly Gloves
The Ejendals Tegera 882 Fully Dipped Fine Assembly Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 1 |
Tear Resistance | Level 2 |
Puncture Resistance | Level 2 |
Uses of the Tegera 882 Fully Dipped Gloves
These Fully Dipped Gloves have excellent oil and water-repellent properties, which makes them ideal for use in dirty, oily and greasy environments. They are suitable for the following applications:
- Assembly
- Automotive
- Building and construction
- Carpentry
- Inspection
- Installation
- Maintenance, repairs and operations
- Soil preparation
- Tiling
- Transportation
The 882 Fine Assembly Gloves are designated Category II gloves, which makes them suitable for most medium tasks. Gloves are placed in this category when the risk is not assessed as irreversible.
Features of the Tegera 882 Fully Dipped Gloves
- Medium nylon gloves fully dipped in nitrile
- Excellent water and oil-repellent properties on both sides
- Flexible and suitable for a variety of light to medium work applications
- Supplied in a discreet black design
- Suitable for use in dirty, greasy and oily environments
- Provide protection against:
- Abrasion injuries
- Contact with dirt
- Contact with fat
- Contact with oil
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 882 Gloves
The Ejendals Tegera 882 Gloves are available in five sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Materials of the Ejendals Tegera 882
- Liner Material: Nylon, 15gg
- Dipping: Fully dipped
- Dipping Material: Nitrile foam
- Grip Pattern: Micro foam grip pattern
- Material Specification: Nitrile (70%), nylon (30%)
Documentation for the Ejendals Tegera 882 Gloves
Conformity Statement | Instructions for Use |
| |