Ejendals Tegera 95 Level 5 Cut Resistant Sleeve
In environments where even your forearms can be at risk from cuts, abrasions, tears or puncture injuries, it is important to wear suitable protection. The Ejendals Tegera 95 Level 5 Cut Resistant Sleeve provides excellent levels of resistance without releasing any fibres, which makes it ideal for environments where this is prohibited. The sleeve is supplied in an ergonomically shaped grey/black design and suitable for a range of medium work applications.
Key Information
- Glove Code: 95
- EN 388:2003
- EN 420
- Size Range: 8 - 10
- Supplied as a single sleeve
Resistance of the Ejendals 95 Level 5 Cut Resistant Sleeve
The Ejendals Tegera 95 Level 5 Cut Resistant Sleeve has been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 3 |
Cut Resistance | Level 5 |
Tear Resistance | Level 4 |
Puncture Resistance | N/A |
Uses of the Tegera 95 Level 5 Cut Resistant Sleeve
The Cut Resistant Sleeve is designed to protect your forearm and is ideal for use in medium risk environments. It is suitable for the following applications:
- Assembly work
- Automotive
- Brick handling
- Building
- Concrete handling
- Construction
- Decontamination
- Engineering
- Glass industry
- Machine operation
- Maintenance, repair and operations
- Metal fabrication
- Paper industry
- Sheet metal handling
- Transportation
- Warehouse work
The 95 Level 5 Cut Resistant Sleeve is labelled as Category II, which means that it is suitable for intermediate risks. This means the risk is classified neither as minimal nor irreversible.
Features of the Ejendals Tegera 95 Level 5 Cut Resistant Sleeve
- Ergonomically shaped for a comfortable fit
- Suitable for environments where your forearms are at risk
- Featuring Dyneema Diamond Technology for excellent levels of resistance
- Does not release any fibres, which is ideal for settings where that's prohibited
- Supplied in an attractive grey/black design
- Fibreglass and steel-fibre free
- Provides protection against:
- Abrasion injuries
- Cut injuries
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 95 Sleeve
The Tegera 95 Level 5 Cut Resistant Sleeve is available in three sizes that should suit the arms of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together.
Size | Circumference (mm) | Length of Sleeve (mm) |
Size 8 | 203mm | 420mm |
Size 9 | 229mm | 480mm |
Size 10 | 254mm | 540mm |
Documentation for the Ejendals 95 Sleeve
Conformity Statement | Instructions for Use |
| |