Honeywell Sharpflex Cut Level C Heat-Resistant Handling Gloves 2232522
Thin, dexterous and lightweight, the Honeywell Sharpflex Cut Level C Heat-Resistant Handling Gloves 2232522 use a heat-resistant Kevlar liner that makes them well suited to assembly, engineering and glass handling. Their flexible cut-resistant design is particularly suited to handling tricky items, while their thin nature means that they can be used as glove liners if necessary.
Please note that although pictured as a single, these gloves are sold as a pair.
Key Information
- Glove Code: 2232522
- EN 388:2003 Rating: 2X4XC
- EN 407:2004 Rating: X1XXXX
- EN 420:2003
- Size Range: 6 - 10
- Supplied as a pair
Resistance of the Honeywell Sharpflex Cut Level C Handling Gloves
The Honeywell Heat-Resistant Handling Gloves have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | N/A |
| Tear Resistance | Level 4 |
| Puncture Resistance | N/A |
| ISO Cut Resistance | Level C |
EN 407
| Property | Resistance Level |
| Flammability Resistance | N/A |
| Contact Heat Resistance | Level 1 |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Resistance to Liquid Metal (Small Splashes) | N/A |
| Resistance to Liquid Metal (Large Splashes) | N/A |
Uses of the Honeywell Sharpflex Cut Level C Gloves
The Honeywell Sharpflex Gloves are designed for high cut risk and hot working conditions. Their flexibility and lightweight design means that they are suitable for use as glove liners, while high abrasion, tear and cut resistance means that they offer impressive protection on their own too. Some applications where these gloves are recommended include:
- Assembly
- Automotive
- Building
- Construction
- Engineering
- General handling
- Glass handling
- Industrial
- Fabrication
- Local authorities
- Maintenance
- Mechanics
- Materials handling
- Oven use
- Packaging
- Packing
- Railway maintenance
- Roofing
- Sharp object handling
- Sheet metal handling
- Transportation
- Utilities
- Warehousing
We advise that this list is just a recommendation list, and the use of these gloves is far wider. Any application that demands resistance against cuts and heat will demand gloves similar to these, while their flexibility, comfort and reliability is ideal for all day lower risk tasks such as working on an assembly line.
Key Features of the Honeywell Sharpflex Cut Level C Gloves
- Features a Kevlar yarn liner for resistance to 100°C contact heat
- Lightweight design ideal for reducing hand fatigue
- Suitable for use as glove liners for extra protection
- Ambidextrous design ideal for longevity and ease of use
- High cut and tear resistance will protect the hands
- Impressive flexibility ideal for handling materials
- High sensitivity gives the user total control during handling
Sizing of the Honeywell Sharpflex Cut Level C Handling Gloves
The Honeywell Gloves are available in a range of sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Materials of the Sharpflex Gloves
Documentation for the Honeywell Gloves
| Conformity Statement | Instructions for Use |
 | |
