MaxiDry Fully Coated Oil Repellent 56-427 Gloves
Maintaining your grip in oily or wet environments can be difficult. However, if you're performing precise work it's integral that you don't damage the objects you're handling. The MaxiDry Fully Coated Oil Repellent 56-427 Gloves are extremely thin and lightweight, making them ideal for delicate tasks.
Key Information
- Product Code: 56-427
- EN 388: 2016 Rating: 4121A
- Available Sizes: 6 - 11
- Supplied as a pair
Resistance of the 56-427 Work Gloves
The MaxiDry Fully Coated Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
|---|
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | Level A |
ISO 18889: 2019
- GR: Chemical resistant gloves with partial protection. These gloves protect only the palms of workers coming into contact with dry or partially dry pesticide residues that remain on plant surfaces after application. These gloves are suitable for re-entry activities where protection of the fingertips and palm side is adequate.
Uses of the Oil Repellent Gloves
The Oil Repellent 56-427 Gloves are designed with a full nitrile coating for added resistance against a wide range of hazards, including oils and abrasions. This makes them suitable for the following applications:
- Aerospace work
- Assembly line work
- Assembly work
- Automotive work
- Cargo handling
- Ceramics handling
- Component handling
- Construction work
- Debris handling
- Decorating work
- DIY work
- Engineering work
- Fine handling
- Grip work
- Industrial work
- Inspection work
- Installation work
- Light engineering
- Line work
- Local authorities work
- Logistics work
- Maintenance work
- Manual handing
- Offshore gas work
- Offshore oil work
- Oil filtration
- Oil handling
- Oil refining
- Packaging work
- Packing work
- Product inspection
- Stock work
- Warehouse work
These are designated Category II gloves, meaning they should be suitable for most medium-weight tasks. The gloves offer excellent resistance against a range of hazards, including oil and water, while also remaining thin enough for delicate work. This makes them ideal for delicate handling tasks in oily and dirty environments.
Key Features and Benefits
- Ultra thin and flexible for added dexterity
- Protects against oils, liquids and chemicals
- Made with light components to reduce hand fatigue
- Locking cuffs to prevent the gloves from slipping
- Designed with a non-slip finish for superior grip
- Ideal for use in oily and wet environments
Sizing of the MaxiDry 56-427 Gloves
The MaxiDry Fully Coated Gloves are available in six sizes to fit most hands. Please measure the circumference of your hand around the knuckles (excluding your thumb) with your palm open and your fingers together. Next, measure the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
|---|
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Materials of the Fully Coated Gloves
- Coating Material: Nitrile butadiene rubber (NBR)
- Liner Material: Stretch nylon
Documentation for the Gloves
| Conformity Statement | Instructions for Use |
|---|
 | |
