MCR Greenknight GP1079NM Recycled PET Heat-Resistant Gloves
If you're looking for a pair of handling gloves with an eco-conscious design, the MCR Greenknight GP1079NM Recycled PET Heat-Resistant Gloves are a fantastic choice. These dextrous gloves feature an ultra-fine micro-foam nitrile palm coat, which significantly improves their grip on wet, dry, and oily components without limiting movement. The gloves have also been designed with touchscreen compatible fingertips for optimal convenience.
Key Information
- Glove Codes:
- GP1079NM-7
- GP1079NM-8
- GP1079NM-9
- GP1079NM-10
- GP1079NM-11
- EN388: 4131A
- EN407: X1XXXX
- Available Sizes: 7 - 11
- Supplied as a pair
Resistance of the MCR Greenknight Gloves
EN388 (Protection Against Mechanical Risks)
| Hazard | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 3 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | Level A |
EN407 (Protection Against Heat)
| Hazard | Resistance Level |
| Burning Behaviour | N/A |
| Contact Heat | Level 1 (100°C) |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Small Splashes of Molten Metal | N/A |
| Large Splashes of Molten Metal | N/A |
Uses of the Recycled PET Gloves
These gloves have been designed with enhanced grip, and a dextrous, heat-resistant design. This makes them suitable for tasks and industries such as:
- General Handling
- Handling Hot Materials
- Oil Handling
- Offshore Gas and Oil
- Warehousing
- Packaging
- Shipping
- Assembly
- Automotive
- Aerospace
- Building and Construction
- Railway Maintenance
Key Features and Benefits
- Pair of gloves with eco-friendly design
- Ideal for a range of handling, assembly, and warehousing tasks
- Constructed with 31% recycled PET in the liner
- Uses a micro-foam nitrile coat that breaks down within 2-3 years of being in landfill
- Contact-heat resistant up to 100°C for brief contact with hot materials
- Abrasion resistant design protects your hands from coarse components
- Ultra-fine palm coat improves grip on wet, oily, and dry materials
- Ergonomically designed for comfort and dexterity during use
- Touchscreen compatible design minimises the need to remove gloves
- Breathable materials help to control sweat build-up
- Available in a range of sizes suitable for adult users
Sizing Information for the Greenknight Gloves
These gloves are available in sizes 7 - 11. If you're not sure which size will offer you the best fit, start by measuring the length of your hand and the circumference of your palm at the knuckle, excluding the thumb (as seen below). Once you have these measurements, compare them to the below sizing table to identify the best fit for you.
| Size | Palm Circumference | Hand Length |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Alternative Handling Gloves
The MCR Greenknight Recycled Polyester Gloves have the same safety features as this PET model, but feature 63% recycled polyester in the liner instead of 31% recycled PET.
Eco-Conscious Glove Design
For those who want a more eco-friendly pair of gloves, this model is a fantastic choice. The liner of these gloves have been constructed using 31% recycled PET, while the palm-coat of micro-foam nitrile has been found to break down within 2-3 years of being in landfill.
Touchscreen Compatible Fingertips
These gloves feature touchscreen compatible fingertips, making them ideal for tasks that may require you to log your progress on a touchscreen device. They are also useful for allowing you to use your smartphone or tablet device in-between tasks without having to remove the gloves.
Materials
- Liner: Recycled PET, Nylon, and Spandex
- Coat: Nitrile Micro-Foam (Palm Only)
Additional Documents
