MCR Safety Winter Lined Water-Repellent Fully-Coated Work Gloves WL1048HP
The MCR Safety Winter Lined Water-Repellent Fully-Coated Work Gloves WL1048HP have been designed to shield the hands against mechanical hazards and protect against water and cold. This is achieved through the use of a double-layered liner consisting of nylon and terry fabric and a water-repellent PVC Sponge Touch coating across the outer surface of the glove. Providing outstanding grip in wet and dry conditions, these versatile work gloves are suitable for a wide range of applications, from construction and agriculture, to automotive work and warehousing.
Key Information
- Glove Code: WL1048HP
- EN 388:2003 Rating: 3232
- EN 511:2006 Rating: 020
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the MCR Safety Winter Lined Gloves WL1048HP
The Winter Lined Water-Repellent Work Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 3 |
| Cut Resistance | Level 2 |
| Tear Resistance | Level 3 |
| Puncture Resistance | Level 2 |
EN 511
| Hazard | Resistance Level |
| Convective Cold | 0 |
| Contact Cold | 2 |
| Water Permeability | 0 |
Uses of the MCR Water-Repellent Fully-Coated Work Gloves
Protecting the hands against cold and water, and enabling a high level of grip in wet and dry conditions, the MCR Winter Lined Gloves are suitable for a wide range of applications, including:
- Agriculture
- Automotive
- Construction
- Local authority
- Logistics
- Outdoor work
- Warehousing
Key Features of the Winter Lined Work Gloves WL1048HP
- Knitted synthetic liner with Terry fabric insert for increased warmth
- Seamless, breathable outer liner promotes high user comfort
- Tough and flexible PVC Sponge Touch finish is water-repellent
- Outstanding grip in dry and wet conditions
- Knitted wrist keeps dirt, water and debris out of the glove
- High level of dexterity in both wet and dry applications
- Good resistance to abrasion and tear
- Treated to prevent the growth of micro-organisms
- Low-linting design increases glove versatility
Sizing of the Winter Lined Fully-Coated Work Gloves
The MCR Safety Winter Lined Water-Repellent Fully-Coated Work Gloves WL1048HP are available in sizes 7 - 10, one of which should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Palm Circumference (mm) | Palm Length (mm) | Minimum Total Length of the Gloves (mm) |
| Size 7 | 178mm | 170mm | 230mm |
| Size 8 | 203mm | 182mm | 240mm |
| Size 9 | 229mm | 192mm | 250mm |
| Size 10 | 254mm | 204mm | 260mm |
Materials of the MCR Safety Fully-Coated Work Gloves
- Liner Material: Nylon/Acrylic
- Coating: PVC Sponge Touch
Documentation
Please click the PDF link below to view the conformity statement for these gloves:
| Conformity Statement | Instructions for Use |
 | |
