Portwest A727 DX VHR Orange TPR Impact Protection Gloves
Using eco friendly TPV (Thermoplastic Vulcanisate) for a high quality protective structure, the Portwest A727 DX VHR Orange TPR Impact Protection Gloves are well suited to rough and tumble work environments. Providing outstanding grip and control along with resistance to a number of hazards, these gloves are used in many different industries and environments.
Key Information
- Glove Codes
- Size 8 : A727ORRM
- Size 9: A727ORRL
- Size 10: A727ORRXL
- Size 11: A727ORRXXL
- Size 12: A727ORRXXXL
- EN 388 Rating: 4X43EP
- EN 407 Rating: X1XXXX
- ANSI Cut Rating: Level A6
- ANSI Abrasion Rating: Level 6
- Size Range: 8-12
- Available as a pair
Resistance of the Portwest A727 Orange Impact Protection Gloves
This pair of gloves is highly resistant to common workplace hazards. They have been tested in accordance with European standards to ensure high levels of performance. The results can be seen below:
EN 388
| PROPERTY | LEVEL OF RESISTANCE |
| Abrasion Resistance | Level 4 |
| Cut Resistance | N/A |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
| ISO Cut Resistance | Level E |
| Impact Protection (Pass/Fail) | Pass |
EN 407
| PROPERTY | LEVEL OF RESISTANCE |
| Burning Behaviour | N/A |
| Contact Heat | Level 1 |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Molten Metal (small splashes) | N/A |
| Molten Metal (large quantities) | N/A |
Uses of the Portwest TPR Impact Protection Gloves
Impressively well suited to working with heavy machinery, or components that are difficult or painful to hold on to, this pair of hand protectors performs well in wet or dry conditions. We particularly recommend this product for any working in the following industries and areas:
- Engineering
- Automotive
- Forestry
- Mechanics
- Construction
- Carpentry
- Oil-handling
- Wood-handling
- Electricians
- Cargo-handling
- Maintenance
- Waste collection
- Machinist
Key Features of the Portwest Anti-Impact Gloves
- Outstanding protection against a range of different workplace risks and hazards
- 13-gauge liner provides a reliable level of dexterity and control
- Sandy nitrile coating for a powerful grip and elevated resistance to abrasion
- Suitable for a range of conditions including wet and dry
- TPR exo-skeleton shields the back of the hand from damaging impact
- Colourful design is high visibility, adds safety when working in fast paced environments
- Comfortable liner fits close to the hand for prolonged use
Sizing of the A727ORR TPR Gloves
These gloves are available in sizes 8-12, which should fit the vast majority of users. To find your size, take a measurement of your hand circumference (as shown in the image below) and then match it up with the table. Select the appropriate size in the drop down menu at the top of the page.
| Size | Circumference (mm) | Length (mm) |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
| Size 12 | Over 279mm | Over 215mm |
Materials of the Portwest A727 Gloves
Shell and lining: HPPE, TPR, Glass Fibre, Elastane
Coating: Nitrile Sandy
Documentation
