Portwest Cut-Resistant Nitrile Palm-Coated Gloves A600
Using a super strong blend of para-aramid fibres and nitrile to provide exceptional cut resistance, the Portwest Cut-Resistant Nitrile Palm-Coated Gloves A600 are ideal for handling materials such as glass, metal and other sharp, oily objects. The gloves also offer outstanding grip, while their flexibility and sensitivity mean that the user has total control when handling potentially hazardous materials.
Key Information
- Glove Codes:
- A600YGYM
- A600YGYL
- A600YGYXL
- EN 388:2003 Rating: 4243B
- EN 420
- Size Range: 8 - 10
- Supplied as a pair
Resistance of the Portwest Cut-Resistant Nitrile Palm-Coated Gloves
The Portwest Nitrile Palm-Coated Gloves A600 have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 2 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
| ISO Cut Resistance | Level B |
Uses of the Portwest Cut-Resistant Palm-Coated Gloves
The Portwest Cut-Resistant Palm-Coated Gloves are well suited for use with sharp materials in hazardous conditions. They can be used inside and outside, in dry, wet and oily conditions, and in clean and dirty environments. They are recommended for many industries, including:
- Assembly
- Automotive
- Building
- Can handling
- Ceramics
- Construction
- Electronics
- Engineering
- General handling
- Glass
- Industrial work
- Local authorities
- Machinist
- Mechanics
- Maintenance
- Materials handling
- Metal handling
- Oil and gas
- Outdoor work
- Railway maintenance
- Sheet metal handling
- Steel sheet handling
- Transport
- Utilities
Key Features of the Portwest Cut-Resistant Nitrile Gloves A600
- Offers maximum abrasion resistance for increased durability
- Features a nitrile palm coating for enhanced grip in all conditions
- Suitable for use in dry, wet and oily working conditions
- Fitted with an inner liner that provides comfort even after extended use
- Supplied with a knitwrist that provides a safe and secure fit
- Extra tough para-aramid liner ensures high cut protection
- Available in a wide range of sizes
Sizing of the Portwest Cut-Resistant Nitrile Palm-Coated Gloves A600
The Portwest Cut-Resistant Gloves are available in three sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Documentation for the Portwest Cut-Resistant Gloves A600
| Conformity Statement | Instructions for Use |
 | |
