Portwest A622 Level C Cut-Resistant PU Coated Gloves
Combining high-performance cut protection with an ergonomic design, the Portwest A622 Level C Cut-Resistant PU Coated Gloves are ideal for high-risk applications such as glass and sheet metal handling. Their smooth PU coating is also abrasion- and tear-resistant as well as providing excellent grip, making these gloves fantastic all-round performers.
Please note that the cut-resistance rating given to Portwest A622 Level C Cut Safe Gloves applies to the fabric in the the palm area only.
What's Included?
- 1 x Pair of Safety Gloves
Key Information
- Glove Codes:
- Size 6: A622G7RXS
- Size 7: A622G7RS
- Size 8: A622G7RM
- Size 9: A622G7RL
- Size 10: A622G7RXL
- Size 11: A622G7RXXL
- EN 388:2016 Rating: 4X43C
- EN 407 Rating: X1XXXX
- Size Range: 6 - 11
- Supplied as a pair
Resistance of the Portwest Cut-Resistant PU Coated Work Gloves
The Portwest A622G7 Gloves have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | N/A |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
| ISO Cut Resistance | Level C |
EN 407
| Property | Resistance Level |
| Burning Resistance | N/A |
| Contact Heat Resistance | Level 1 |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Molten Metal Resistance (Small Splashes) | N/A |
| Molten Metal Resistance (Large Splashes) | N/A |
Uses of the Portwest A62G77 Cut-Resistant Palm Coated Work Gloves
Providing superior levels of protection, the Portwest A62G77 Gloves are designed for work in cut-risk environments. Typical applications include:
- Assembly
- Automotive
- Cutting
- Glass handling
- Maintenance
- Sheet metal handling
The Portwest A62G77 are designated Category II gloves, meaning they are suitable for medium-duty applications and intermediate levels of risk.
Key Features of the Portwest Cut-Resistant PU Coated Work Gloves
- High-performance cut-resistant work gloves
- Smooth PU coating for increased abrasion resistance
- Palm dipped to increase dexterity and ventilation
- Breathable, seamless liner for improved comfort
- Fine 13 gauge liner for a perfect
- Low-linting construction for minimal product contamination
Sizing of the Portwest Cut-Resistant PU Coated Gloves
The Portwest A62G77 Gloves are available in six different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Please note, Portwest A622G7 Gloves provide a snug fit. If you are concerned about how tight they may fit you, we recommend purchasing a size up.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Materials of the Portwest Cut-Resistant PU Palm Gloves
- Liner Materials: HPPE, Glass fibre
- Palm Material: Polyurethane
Documentation for the Portwest Cut-Resistant PU Coated Gloves
| Conformity Statement | Instructions for Use |
 | |
To access the data sheet for this product, please click here
