Predator Lightning Kevlar Stitched Leather Mig Welding Gauntlets RSW1C-KEV
Designed specifically for MIG (Metal Inert Gas) welding, the Predator Lightning Kevlar Stitched Leather Mig Welding Gauntlets RSW1C-KEV are constructed from high-quality leather and sewn with heat-resistant aramid thread to ensure excellent resistance to both the thermal and mechanical hazards involved with this type of welding. In addition to providing good protection for MIG welding, these gauntlets are also suitable for hot handling tasks, such as sheet metal handling.
Key Information
- Glove Code: RSW1C-KEV
- EN 388:2003 Rating 4233
- EN 407:2004 Rating 414X4X
- Size: 11
- Colour: Blue
- Length: 14 inch
- Supplied as a pair
Resistance of the Predator Lightning Kevlar Stitched Leather Gauntlets
The Predator Lightning Leather Gauntlets have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 2 |
| Tear Resistance | Level 3 |
| Puncture Resistance | Level 3 |
EN 407
| Test | Resistance Level |
| Resistance to Flammability | Level 4 |
| Contact Heat Resistance | Level 1 |
| Convective Heat Resistance | Level 4 |
| Radiant Heat Resistance | X |
| Resistance to Small Splashes of Molten Metal | Level 4 |
| Resistance to Large Splashes of Molten Metal | X |
Uses the Predator Mig Welding Gauntlets
Providing excellent protection against both mechanical and thermal hazards, the Predator Mig Welding Gauntlets are ideal for a range of applications, including:
- Arc welding
- Manual handling
- MIG welding
- Sheet metal handling
The Predator Lightning Leather Welding Gauntlets are designated Category II gloves, meaning that they should be suitable for most medium-weight tasks.
Key Features of the Lightning Leather Mig Gauntlets
- Shoulder split leather gauntlets designed for MIG welding
- Excellent resistance to abrasion, tear and puncture
- Reinforced leather thumb crotch for greater durability
- Pure cotton lining for enhanced contact heat resistance
- Will shield the hand against contact heat up to 100°C
- Rolled cuff hem provides extra strength
- Heat-resistant Twaron aramid stitching for greater longevity
- Protects against convective heat of 80Kw/kvm for ≤18 seconds
- Good resistance to small molten metal splashes
- Provides excellent dexterity for manual tasks
Sizing of the Predator Lightning Leather Mig Welding Gauntlets
The Predator Leather Welding Gauntlets are available in Size 11 only, with a length of 14 inches. To determine whether the available size will fit you, please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 11 | 279mm | 215mm |
Please note that these gloves are designed to have a loose fit, and Size 11 should therefore be appropriate for most users.
Materials of the Predator Lightning Kevlar Stitched Leather Gauntlets
- Body Material: Leather
- Liner Material: Pure cotton
- Stitching Material: Twaron aramid fibre
Documentation for the Lightning Leather Welding Gauntlets RSW1C-KEV
| Conformity Statement |
 |
