Towa PowerGrab Katana Kevlar Cut Resistant 310 Gloves
Gloves that are both comfortable and protective are hard to come by. Thankfully, the Towa PowerGrab Katana Kevlar Cut Resistant 310 Gloves are here for you! Featuring a double latex coating on the palms and thumbs, the gloves help protect your hands against liquids so you remain comfortable throughout use.
The gloves are also made with seamless 10 gauge Kevlar and steel fibre liners for excellent cut protection and comfort. Ergonomic in design, the gloves help minimise hand fatigue so you remain at ease even when you're working for long periods of time.
Key Information
- Product Code: 310
- EN 388: 2003 Rating: 3543
- EN 407: 2004 Rating: X2XXXX
- Available Sizes: 7 - 11
- Supplied as a pair
Resistance of the 310 Protective Gloves
The Towa PowerGrab Katana Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 3 |
| Cut Resistance | Level 5 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
EN 407
| Property | Resistance Level |
| Resistance to Flammability | N/A |
| Contact Heat Resistance | Level 2 |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Resistance to Small Splashes of Molten Metal | N/A |
| Resistance to Large Splashes of Molten Metal | N/A |
Uses of the Cut Resistant Gloves
The Katana Kevlar Cut Resistant Gloves provide outstanding protection against mechanical risks while also protecting your hands against the infiltration of liquid. This makes them suitable for a number of applications, including the following:
- Assembly line work
- Assembly work
- Blade handling
- Bottle handling
- Bricklaying work
- Building work
- Cable handling
- Can handling
- Cargo handling
- Carpentry work
- Component handling
- Construction work
- Cutting
- Decorating work
- DIY work
- Fine handling
- Glass handling
- Grinding work
- Grip work
- Industrial work
- Inspection work
- Knife handling
- Line work
- Manual handling
- Packaging work
- Packing work
- Product inspection
- Sharp object handling
- Sheet steel handling
- Warehouse work
- Wet work
These are designated Category II gloves, meaning they should be suitable for most medium-weight tasks. As the gloves provide excellent resistance against mechanical hazards and liquids, they are ideal for handling tasks in settings where there is a risk of abrasions, cuts, tears or punctures.
Key Features and Benefits
- Provides excellent grip in tough conditions
- Designed with crinkle finish to prevent creases
- Features a double latex coating to prevent liquid penetration
- Constructed to provide superior grip, strength and durability
- Made with seamless 10 gauge Kevlar and steel fibre liners
- Ergonomic design minimises hand fatigue and improves comfort
- Thumbs are fully coated to protect this vulnerable area
Sizing of the Towa PowerGrab Katana Work Gloves
The Kevlar Cut Resistant Gloves are available in five sizes to fit most hands. Please measure the circumference of your hand around the knuckles (excluding your thumb) with your palm open and your fingers together. Next, measure the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Washing Instructions
We do not recommend machine washing these gloves, as it may impact their performance. To clean these gloves, wipe them with a damp cloth in order to remove any contaminants, and then air dry.
Conformity Statement
