TurtleSkin CP Insider 330 Ultra-Thin Cut-Resistant Work Gloves
The TurtleSkin CP Insider 330 Ultra-Thin Cut-Resistant Work Gloves have been designed to protect against sharp objects and materials, while ensuring excellent dexterity and grip. Constructed using ultra-thin TurtleSkin material, these gloves are thin, light and breathable, making them ideal for use as glove liners.
Key Information
- Glove Code: 330
- EN 388 Rating: 4442
- Size Range: Small - Extra Large
- Supplied as a pair
Sizing of the TurtleSkin 330 Cut-Resistant Work Gloves
The Ultra-Thin Work Gloves are available in sizes Small (Size 7), Medium (Size 8), Large (Size 9) and Extra Large (Size 10). To find the right size for you, please measure the length of your hand from the tip of your middle finger to the bottom of your palm, and the width of your palm at the widest point (as shown below). Then consult the table below and use the drop-down at the top of the page to select the size for you.
If your measurements fall between two sizes, we recommend choosing the smaller of the two for a snug fit.
| Glove Size | Palm Width (cm) | Length (cm) |
| Small (Size 7) | 17.8 - 20.3cm | 17.1cm |
| Medium (Size 8) | 20.3 - 22.9cm | 18.2cm |
| Large (Size 9) | 22.9 - 25.4cm | 19.2cm |
| Extra Large (Size 10) | 25.4 - 27.9cm | 20.4cm |
Resistance of the TurtleSkin CP Insider 330 Gloves
The TurtleSkin CP Insider 330 Ultra-Thin Cut-Resistant Work Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 4 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 2 |
Uses of the Cut-Resistant Work Gloves
Offering excellent resistance to cut, abrasion and tear, the TurtleSkin 330 Gloves are suitable for a wide range of tasks, including (but not limited to):
- Cleaning
- Janitorial Work
- Glass handling
- Metal handling
- Recycling
- Waste management
Key Features and Benefits
- Constructed using ultra-thin patented TurtleSkin material
- Tight weave creates an almost impenetrable glove
- Light and breathable material provides comfort and dexterity
- Designed for demanding applications such as waste management
- Excellent resistance to abrasion, cut and tear
- Ideal for use as a glove liner for enhanced protection
- Can be washed for increased hygiene and longevity
Premium Protection Against Sharps
Certain industries leave open the risk of your palms and fingers coming into accidental contact with sharp objects such as needles and glass. Tested to provide high levels of protection, these gloves feature a thin but impenetrable material to prevent injuries to your hands as you work.
Lightweight and Breathable for Comfort
As well as adopting an anatomical form to allow for full dexterity, the TurtleSkin Gloves are created with a thin, breathable material that allows for air to circulate to your hands as you complete heavy-duty tasks.
Documentation
