Unigloves Nitrex 370W Yellow Hi-Vis Heat-Resistant Thermal Gloves
Two of the biggest hazards during winter work are the cold and lack of visibility, and the Unigloves Nitrex 370W Yellow Hi-Vis Heat-Resistant Thermal Gloves can help with both. They combine robust thermal properties with a bright yellow colour, plus their sandy foam coating helps prevent slips in wet and icy conditions. They also offer impressive mechanical protection with maximum abrasion resistance and contact heat resistance to 100°C.
Key Information
- Glove Code: 370W
- EN 388:2003 Rating: 4232B
- Size Range: 7 - 11
- Supplied as a pair
Resistance of the Unigloves Hi-Vis Thermal Grip Gloves
EN 388 (Mechanical Resistance)
Mechanical Risk | Resistance Level |
---|
Abrasion | Level 4 |
Cut | Level 2 |
Tear | Level 3 |
Puncture | Level 2 |
ISO Cut | Level B |
EN 511 (Resistance to Cold)
Hazard | Resistance Level |
---|
Convective Cold | N/A |
Contact Cold | Level 2 |
Water Permeability | N/A |
EN 407 (Thermal Resistance)
Hazard | Resistance Level |
---|
Burning Behaviour | N/A |
Contact Heat | Level 1 (100°C) |
Convective Heat | N/A |
Radiant Heat | N/A |
Small Splashes of Molten Metal | N/A |
Large Splashes of Molten Metal | N/A |
Applications of the UniGloves Heat- and Cold-Resistant Handling Gloves
The combination of mechanical, cold and heat resistance make the Nitrex Hi-Vis Safety Gloves seriously versatile. They're suited to a variety of industries and applications, including but not limited the following:
- General cold handling
- Cold-store and freezer work
- Warehousing
- Logistics
- Construction and building
- Maintenance
Key Features and Benefits of the Nitrex Yellow Hi-Vis Winter WOrk Gloves
- Bright yellow hi-vis colour improves visibility in low light conditions
- Maximum level 4 abrasion resistance improves durability and protects hands from scrapes
- Also offer some resistance to tears, cuts and punctures for more versatile use
- Contact heat resistance up to 100°C for a limited time
- Brushed acrylic liner is extremely warm and soft on the hands
- Thermal brushed polyester lining for insulation against cold
- Nitrile foam coating ensure powerful grip in wet conditions
- Spandex liner and lightweight build boost dexterity
- Odour-control keeps hands fresh and reduces microbe growth for hygiene
- Five sizes available to suit most users
Impressive and Versatile protection
The Nitrex 370W Gloves are fully certified against stringent EN safety standards for protection you can count on. Not only are they extremely warm, they also boast maximum level 4 abrasion resistance and contact heat resistance up to 100°C for a limited time. This combination makes them really versatile and suitable for a wide range of applications in cold environments.
Bright Yellow Colour for High-Visibility
The bright yellow design of these Unigloves Nitrex Heat-Resistant Gloves gives them really great visibility, even in low-light conditions. This makes work during evenings and nights safer. The hi-vis is also ideal for road maintenance work where being seen by drivers is vital.
Also available in hi-vis orange.
Soft and Warm Cotton Lining
Your hands will stay warm and comfortable during winter work thanks to the soft, terry-brushed acrylic liner. It's also kind to your skin, helping to avoid irritation, even after a long day's work.
Sizing of the Nitrex Hi-Vis Water-Resistant Thermal Gloves
To ensure that you have the best possible fit from your gloves, the Nitrex Hi-Vis Gloves are available in five sizes that should be suited to most users. To find your glove size, start by measuring the length of your hand and circumference of your palm at the knuckle (as seen below). Once you have these measurements, you can compare them to the sizing table below to identify your glove size.
Size | Hand Circumference | Hand Length |
---|
Size 7 | 178mm | 170mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Documentation