Uvex Unilite Thermo Plus Cut C Winter Gloves 60591
Blending both cut resistance and thermal insulation in a single innovative design, the Uvex Unilite Thermo Plus Cut C Winter Gloves 60591 are the best gloves for cold store workers and construction work in winter weather. Developed using an extremely robust polymer material, the Uvex Thermo Plus Gloves stay flexible in cold conditions, while their broad range of resistances, including first rate protection against cuts and tears, make sure your hands are safe from physical harm.
Key Information
- Glove Codes: 60591
- EN 388: 3X42C
- EN 511: 02X
- Size Range: 7 - 11
- Supplied as a pair
Physical Resistance of the Uvex Gloves
The Uvex Unilite Thermo Plus Gloves have been tested to EN 388, which is the European standard for gauging how effectively a glove protects your hands against mechanical risks. Please check the table below to find out the results for these gloves.
Property | Resistance Level |
Abrasion Resistance | Level 3 |
Cut Resistance | N/A |
Tear Resistance | Level 4 |
Puncture Resistance | Level 2 |
Blade Cut Resistance | Level C |
Cold Resistance of the Uvex Gloves
The Uvex Unilite Thermo Plus have also been tested to EN 511, which is the European standard for protection against thermal risks i.e freezing temperatures. Please check the table below to find out the results for these gloves.
EN 511
Hazard | Level of Resistance |
Convective Cold Resistance | Level 0 |
Contact Cold Resistance | Level 2 |
Water Permeability | N/A |
What These Tables Mean
The Uvex Thermo Plus Gloves achieved an all-round excellent set of scores in their EN 388 test, providing high to moderate protection against lacerations, tears and abrasions. While their resistance to punctures is not as formidable, the Thermo Plus succeed in insulating the hands against moderately cold contact temperatures.
Key Features and Benefits
- Cut Protection: Robust polymer coating tested to a level C with the ISO Blade Cut test, allowing for superior protection against cuts and lacerations
- Insulation: Double layer of acrylic and wool liner allow for superb protection against infiltrating cold
- Tear Resistance: Tears caused by cuts and snags can put an end to your glove's life, but the Thermo Plus will withstand the worst
- Tactile: The thermal padding of the Thermo Plus does not detract from the fantastic tactile sensitivity, allowing for better handling
Applications for the Unilite Gloves
With a high level of cut resistance and superior thermal insulation, the Unilite Thermo Plus 60591 perform well in work environments where elements of cold and dangerous mechanical risks are daily factors. Some of the industries and tasks the gloves are suitable for are listed here:
- Outdoor development
- Cold store duties
- Freezer work
- Refrigerated warehouses
- Construction
- General handling
- Construction work
- Manual handling
Winter Insulation
Drawing on an impressive double layer of wool and acrylic, the Uvex Unilite Thermo Plus are built to repel the worst of wind and cold. Whether you work in cold storage or are completing a construction project in the cold outdoors, the Thermo Plus will see you finish safely.
Robust Protection Against Cuts and Tears
The robust polymer cladding of the Uvex Thermo Plus allows for high protection against both lacerations and tearing. Whether you're working with sharp tools or dealing with equipment with sharp edges, the Thermo Plus will provide a sufficient barrier between your hands and danger.
Sizing Information
The Uvex Unilite Thermo Plus Cut C Gloves are available in five different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together and the length of your hand from the tip of your middle finger to your wrist. Next, refer to the table below to find out which size will fit your hands best.
Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Materials of the Uvex Unilite Gloves
- Material: Wool and acrylic
- Coating Material: Polymer
Documentation for the Uvex Unilite Thermo Plus Gloves
Conformity Statement | Product Sheet |
| |