Ejendals Tegera 2301 Latex Chemical Resistant Work Gloves
Domestic and industrial level chemicals are found everywhere, but if your job involves handling them on a daily basis it's important to fortify your hands against corrosive injuries. Constructed from a blend of latex and neoprene, the Ejendals Tegera 2301 Latex Chemical Resistant Work Gloves will repel a broad range of chemicals with a permeation time of at least 30 minutes, while their diamond palms ensure an excellent grip at all times.
Key Information
- Glove Codes:
- 2301-7
- 2301-8
- 2301-9
- 2301-10
- 2301-11
- EN 388: 4542C
- EN 374-1: AKLMNPST
- Size Range: 6 - 11
- Supplied as a pair
What Are the Ejendals Tegera 2301 Gloves For?
The Ejendals Tegera 2301 Gloves blend a highly flexible latex/neoprene exterior with a comfortable cotton liner to facilitate excellent chemical resistance and improved handling. Tasks where these gloves might come useful include:
- Agriculture
- Chemical processing
- Chemical handling
- Laboratory work
- Rubber and plastic
- Pharmaceutical work
- Cleaning
- Utilities
- Janitorial work
What Risks Are the Ejendals Tegera 2301 Ideal for Protecting Against?
The blend of latex and neoprene materials will continue to provide moderate protection against corrosive injuries sustained through contact with chemicals, while their diamond embossed grip will provide excellent handling during contact with moisture and damp materials.
What Can the Ejendals Tegera 2301 Protect Me From?
The Ejendals Tegera 2301 Gloves have been tested to EN standards EN 388 and EN 374-1 to achieve the following results:
EN 388 (Mechanical resistance)
| Hazard | Level of Resistance |
| Abrasion Resistance | Level 2 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 1 |
| Puncture Resistance | Level 0 |
| ISO Blade Cut | N/A |
EN 374-1 (Chemical Resistance)
| Symbol | Chemical |
| Methanol | A |
| Sodium Hydroxide 40% | K |
| Sulphuric Acid 96% | L |
| Nitric Acid 65% | M |
| Acetic Acid 99% | N |
| Hydrogen Peroxide 30% | P |
| Hydrofluoric Acid 60% | S |
| Formaldehyde | T |
What Does This Mean?
In terms of mechanical resistance (EN 388), the Ejendals Tegera 2301 will resist modest abrasions with some resistance to tears and punctures, a higher durability than most other reusable chemical gloves. According to their EN 374-1 tests, the Tegera 2301 will provide Type A protection against a wide range of domestic and industrial chemicals - this means they will resist chemical permeation for up to at least 30 minutes.
Which Size of Gloves Should I Select?
The Ejendals Gloves are available in five different sizes, meaning that you should be able to find the size that's right for you. To measure your hand, measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together as seen in the image below.
| Glove Size | Palm Circ. | Palm Length |
| Size 7 | 178mm | 170mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
In Which Environments Can I Use the Ejendals 2301 Latex Gloves?
The Ejendals Gloves are designed for reliable protection and ease-of-use. Suitable environments include:
- Indoor
- Outdoor
- Clean
- Dirty
- Greasy
- Dry
Can I Wash the Ejendals Tegera 2301 Gloves?
Do not use any chemicals or sharp-edged objects for cleaning these gloves. Chemical gloves are not meant to be washed.
What Materials Are the Ejendals Gloves Made From?
The Ejendals Tegera 2301 Gloves are designed using a number of different materials. These materials are as follows:
- Coating: Latex, neoprene
- Liner: Cotton flock
What Documentation Is Available?
| Conformity Statement | Instructions for Use |
 | |
