Ejendals Tegera 81000 Latex Chemical Resistant Gloves
Chemical resistant gloves must protect against permeation, penetration and degradation. The Ejendals Tegera 81000 Latex Chemical Resistant Gloves are medium latex gloves that provide excellent protection against various chemical hazards, while their water-repellent exterior makes them suitable for use in wet environments.
Key Information
- Glove Code: 81000
- EN 320:2003 Rating: 3111
- EN 374 - 2
- EN 374 - 3
- EN 420:2003
- Size Range: 6.5 - 10.5
- Supplied as a pair
Resistance of the Ejendals 81000 Latex Chemical Resistant Gloves
The Ejendals 81000 Chemical Resistant Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 3 |
Cut Resistance | Level 1 |
Tear Resistance | Level 1 |
Puncture Resistance | Level 1 |
EN 374 - 2
EN374-2 resistance to penetration by micro-organisms.
EN 374 - 3
EN374-3 Resistance to chemical hazards (permeation), namely Methanol, Sodium Hydroxide (40%) and Sulphuric Acid (96%).
Uses of the Tegera 81000 Latex Chemical Resistant Gloves
The Tegera 81000 Latex Chemical Resistant Gloves can be used in chemical risk environments, environments hazardous to health, corrosive, wet and dirty environments. This makes them suitable for the following applications:
- Agriculture
- Chemical work
- Cleaning
- Decontamination
- Laboratory work
- Paper industry
- Sanitation
- Service industry
The Tegera 81000 Chemical Resistant Gloves are designated Category III gloves, which makes them suitable to protect against the highest levels of risk, such as highly corrosive acids. These are glove of complex design that can protect even from irreversible or mortal risks.
Features of the 81000 Latex Gloves
- Medium latex gloves that protect against chemical hazards
- Water-repellent exterior for use in wet environments
- Supplied in a black design with a diamond grip pattern for improved handling
- Provide protection against:
- Contact with chemicals
- Contact with moisture
- Corrosive injuries
- Risk of infection
Sizing of the Tegera 81000 Chemical Resistant Gloves
The Tegera 81000 Chemical Resistant Gloves are available in five sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 6.5 | 165mm | 165.5mm |
Size 7.5 | 190.5mm | 176.5mm |
Size 8.5 | 216mm | 187mm |
Size 9.5 | 241.5mm | 198mm |
Size 10.5 | 266.5mm | 209.5mm |
Materials of the Ejendals Tegera
- Material: Latex
- Thickness: 0.8mm
- Inside: Flock-lined
- Grip Pattern: Diamond grip pattern
Documentation for the Ejendals Tegera 81000 Gloves
Conformity Statement | Instructions for Use |
| |