Ejendals Tegera 7363 Cut and Chemical Resistance Safety Gloves
Protection against chemicals, powders, solvents and harmful liquids is vital in a laboratory. Ejendals Tegera 7363 Cut and Chemical Resistance Laboratory Safety Gloves protect the user against eight different chemicals whilst providing across-the-board EN 388 mechanical workplace hazard protection. For use with heated material, the glove palms are contact heat resistant to material with a temperature not exceeding 100°C.
What's Included?
- 1 x Pair of Safety Gloves
Protection Ratings
EN 374
EN 374 is the European safety regulation that determines the chemical resistance of garments and gloves. Please view the list below to see which chemicals Ejendals 7363 Gloves provide protection against:
- Acetic Acid (99%)
- Ammonium Hydroxide (25%)
- Formaldehyde (37%)
- Hydrogen Peroxide (30%)
- Methanol
- n-Heptane
- Nitric Acid (65%)
- Sodium Hydroxide (40%)
EN 388
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.
The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.
| Standard | Resistance Rating |
| Abrasion Resistance | Level 4 |
| Cut Resistance | N/A |
| Tear Resistance | Level 3 |
| Puncture Resistance | Level 2 |
| ISO Cut Resistance | Level C |
EN 407
EN 407 is a European safety regulation governing the sale of gloves and garments that are resistant to any number of fire, heat and molten related hazards. Please view the table below to find out more:
| Standard | Resistance Rating |
| Burning Resistance | N/A |
| Contact Heat Resistance | Level 1 (100°C) |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Resistance to Small Molten Splashes | N/A |
| Resistance to Large Molten Splashes | N/A |
Suitable Environments and Professions for Use
Ejendals 7363 Safety Gloves are suitable for use in a wide range of professional applications. See the list below for a few examples:
Key Properties and Features
- Protection against eight different commonly encountered chemicals
- Fully lined with a grease, oil and waterproof nitrile coating
- Level C cut-resistance rating is incredibly high for a chemically resistant glove
- Contact heat resistant for safe transfer of material with a temperature of up to 100°C
- Sand coated palm and fingertips enhance grip strength and precision at fingertips
- Phthalate and latex free design gives peace of mind regarding allergy issues
- Available in four different sizes for a guaranteed fit
Which Size Is Correct for Me?
To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
| Size | Circumference of Palm (mm) | Length of Palm (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Level C Cut Resistance
A chemically resistant glove with a Level C cut-resistance rating is incredibly hard to find. Ejendals have married the two protections to cover a variety of hazards and circumstances that can arise in a laboratory setting. Rest assured knowing your hands are safe when handling jagged, abrasive and sharp material like knives, blades and scalpels.
Contact Heat Protection
Thought these gloves couldn't get any more protective? Think again. Tegera 7363 Gloves allow you to safely handle, carry, hold and transfer material with a temperature of 100°C for an incredible fifteen seconds.
Sand Coated Palm Finish
A san coated palm finish enhances the dexterity in your fingertips and the stability and strength in your palm when gripping and holding material. The finish on Tegera 7363 Gloves is a light dusting, which is just enough to create a textured layer that safely adheres to whatever it is you're picking up.
Oil, Grease and Waterproof Protection
Ejendals 7363 Chemical Safety Gloves are fully dipped in a high-quality nitrile coating that is resistant to grease, oil and water. Avoid smearing by simply washing them off using soap and hot water.
Extended Cuff Guard
An extended cuff is essential when handling hazardous material like chemicals and solvents. Without one, even a tiny splash can cause serious damage to exposed or under-protected skin.
Phthalate and Latex Free Design
Phthalate and latex are common irritants used as both additives and enhancers in woven safety gloves. Unfortunately, they can cause skin irritation and dermatologic issues because of their chemical makeup. Ejendals 7363 Gloves are 100% phthalate and latex free for peace of mind for those who experience frequent irritation.
User Instructions
Click here to view the user instructions for this product
Declaration of Conformity Statement
Click here to view the declaration of conformity statement for this pair of gloves
