TurtleSkin WorkWear Plus Leather Work Gloves
The TurtleSkin WorkWear Plus Leather Work Gloves have been designed specifically for tasks that require dexterity, cut and puncture resistance and high levels of grip and tactile sensitivity. This is achieved through the use of leather and a patented, tightly-woven TurtleSkin aramid fibre, which is lightweight and almost impenetrable. These gloves are ideal for a broad range of manual tasks, including metal work, glass handling and packing.
What's Included?
Key Information
- Glove Codes:
- Extra Small: Q4073
- Small: Q4074
- Medium: Q3992
- Large: Q3993
- Extra Large: Q3991
- XX-Large: Q4078
- EN 388:2003 Rating: 3243
- Available Sizes: Extra Small - XX-Large
- Supplied as a pair
Resistance of the TurtleSkin Leather Work Gloves
The TurtleSkin WorkWear Plus Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 3 |
| Cut Resistance | Level 2 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
Sizing Information
The Work Wear Plus Leather Gloves are available in six sizes. To find the right size for you, please measure the length of your hand from the tip of your middle finger to the bottom of your palm, and the width of your palm at the widest point (as shown below), then refer to the sizing details in the table below. If your measurements fall between two sizes, we recommend choosing the smaller of the two for a snug fit.
| Glove Size | Palm Width (cm) | Length (cm) |
| Extra Small (Size 6) | 15.2 - 17.8cm | 16cm |
| Small (Size 7) | 17.8 - 20.3cm | 17.1cm |
| Medium (Size 8) | 20.3 - 22.9cm | 18.2cm |
| Large (Size 9) | 22.9 - 25.4cm | 19.2cm |
| Extra Large (Size 10) | 25.4 - 27.9cm | 20.4cm |
| XX-Large (Size 11) | 27.9cm+ | 21.5cm+ |
Uses of the WorkWear Plus Gloves
With such a versatile design, users may find these gloves useful for a wide range of applications. Some of these include:
- Metal and glass handling
- Engineering
- Laundry services
- Maintenance
- Precision work
- General handling
- Assembly
Key Features and Benefits
- Provides outstanding levels of resistance to abrasions, cuts, tears and punctures
- Leather palms lined with aramid fabric to enhance protection against sharps
- Lightweight and breathable material provides good comfort
- Stretch-knit back for ventilation and unrestricted movement
- Adjustable Velcro wrist closure provides a tight, secure fit
- Tested and certified under EN 388 safety standards for reliability
Premium Protection Against Sharps
Certain industries leave open the risk of your palms and fingers coming into accidental contact with sharp objects such as needles and glass. Tested to provide high levels of protection, these gloves feature an impenetrable leather material on the palms, with an additional layer of aramid fabric to prevent injuries to your hands as you work.
Are the WorkWear Gloves Comfortable?
Designed to support a full range of movement and dexterity, these feature a stretchy, breathable knitted material on the back of the gloves. This design makes these gloves suitable for a range of applications, whether they involve heavy-duty, strenuous tasks or handling delicate and fine objects.
Additionally, the feature an adjustable Velcro closure at the wrists, for users to personalise the use of the gloves for either a looser or tighter fit. The compressive nature of this closure also helps to reduce injuries to the wrists, which can greatly impede your ability to complete tasks.
Documentation
.jpg)
.jpg)
